WD-40 COMPANY -- WD-40 AEROSOL, 10016  -- 8030-00N078171
<pre>=====================  Product Identification  =====================

Product ID:WD-40 AEROSOL, 10016
MSDS Date:06/01/1996
FSC:8030
NIIN:00N078171
=== Responsible Party ===
Company Name:WD-40 COMPANY
Address:1061 CUDAHY PLACE (92110)
City:SAN DIEGO
State:CA
ZIP:92138-0607
Country:US
Info Phone Num:619-275-1400
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:R MILES
CAGE:09137
=== Contractor Identification ===
Company Name:WD-40 COMPANY
Address:1061 CUDAHY PLACE (92110)
Box:80607
City:SAN DIEGO
State:CA
ZIP:92138-0607
Country:US
Phone:619-275-1400
CAGE:09137

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT; (ALIPHATIC PETROLEUM DISTILLATES)
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 60-70%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATE, SOLVENT DEWAXED
    (SEVERE), HEAVY PARAFFINIC; (PETROLEUM BASE OIL)
CAS:64742-65-0
RTECS #:PY8038501
Fraction by Wt: 15-25%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:NON-HAZARDOUS INGREDIENTS
Fraction by Wt: <10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CARBON DIOXIDE
CAS:124-38-9
RTECS #:FF6400000
Fraction by Wt: 2-3%
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: MAY CAUSE
    ANESTHESIA, HEADACHE, DIZZINESS, NAUSEA, AND UPPER RESPIRATORY
    IRRITATION.SKIN: MAY CAUSE DRYING OF SKIN AND/OR IRRITATION. EYES:
    MAY CAUSE IRRITATION, TEARING AND REDNESS . INGESTION: MAY CAUSE
    IRRITATION, NAUSEA, VOMITING AND DIARRHEA. DANGER! IF SWALLOWED,
    CAN ENTER (EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: LUNGS AND MAY CAUSE CHEMICAL
    PNEUMONITIS. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:PREEXISTING MEDICAL CONDITIONS SUCH
    AS EYE, SKIN AND RESPIRATORY DISORDERS MAY BE AGGRAVATED BY
    EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DO NOT INDUCE VOMITING, SEEK MEDICAL ATTENTION
    IMMEDIATELY. EYES: IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER
    FOR AT LEAST 15 MINUTES. SKIN: WASH WITH SOAP AND WATER.
    INHALATION: REMOVE T O FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF
    NECESSARY. IF BREATHING IS DIFFICULT, GIVE OXYGEN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:>110F,>43C
Lower Limits:1.0%
Upper Limits:6.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . CONTENTS UNDER PRESSURE.
Unusual Fire/Explosion Hazard:FLAMMABLE - U.F.C. LEVEL 3 AEROSOL.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILL UNLIKELY FROM AEROSOL CANS. LEAKING CANS
    SHOULD BE PLACED IN PLASTIC BAG OR OPEN PAIL UNTIL PRESSURE HAS
    DISSIPATED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM SOURCES OF IGNITION. AVOID
    EXCESSIVE INHALATION OF SPRAY PARTICLES. DO NOT TAKE INTERNALLY. DO
    NOT PUNCTURE, INCINERATE/STORE CONTR > 120F.
Other Precautions:EXPOSURE TO HEAT MAY CAUSE BURSTING. KEEP CAN AWAY
    FROM ELECTRICAL CURRENT OR BATTERY TERMINALS. ELECTRICAL ARCING CAN
    CAUSE BURN-THROUGH (PUNCTURE) WHICH MAY RESULT IN FLASH FIRE,
    CAUSING SERIOUS INJ URY. KEEP FROM CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ADVISED WHEN CONCENTRATIONS EXCEED TLV. USE
    NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:SUFFICIENT TO KEEP SOLVENT VAPOR LESS THAN TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED. EMERGENCY EYEWASH AND DELUGE
    SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Vapor Pres:100+/-5PSI
Vapor Density:>1
Spec Gravity:0.816 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT AMBER, CHARACTERISTIC ODOR
Percent Volatiles by Volume:68

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
    MONOXIDE AND/OR CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EMPTY AEROSOL CANS SHOULD NOT BE PUNCTURED OR
    INCINERATED; BURY IN LANDFILL. LIQUID SHOULD BE INCINERATED OR
    BURNED IN LANDFILL. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.